It's 10 p.m. at the boat ramp. The trailer is behind you, the ramp drops off into black water, and your factory reverse lights are throwing a dim glow about as far as your rear bumper. You're backing up mostly by feel and by the mirror, hoping the hitch lines up.
Anyone who tows, camps, or works out of a truck has been there. The factory reverse light isn't built to light a work area. It's built to tell other drivers you're moving backward. An LED reverse light pod is built to do the opposite job: light up the ground around you so you can see what you're backing toward.
This guide covers what LED reverse lights actually do, how to choose between the amber and red backlight, how they wire up, and what to know before you buy. If you want to jump straight to the kits, the full lineup is on our LED reverse lights page.
Why Are Factory Reverse Lights So Dim?
A factory reverse lamp is a small signal light. It has to be bright enough for people behind you to notice, not bright enough to light a campsite. On a lifted truck or a tall SUV, the lamp also sits high and aims down at a shallow patch of pavement. You get a little light directly behind the bumper and almost nothing at the sides, where the trailer tongue, a curb, or a rock is waiting.
What Does an LED Reverse Light Pod Do?
An add-on reverse pod is a compact LED light that mounts on the rear of the vehicle and works alongside your factory lamps. It doesn't replace them. M&R reverse kits use two 20W PRO pods with a flood pattern, which spreads light wide and low rather than throwing it far down the road. That's the right shape for the job, because you need to see the ground, the hitch, and the area to either side, not something 300 feet away.
- TIR lens: a Total Internal Reflection lens collects the LED's light and directs it where you need it, which cuts glare and improves efficiency.
- 304 aluminum housing: with a UV polyester powder coat that protects against UV, salt water, corrosion, fading, and scratches.
- Thermal management: adjusts brightness automatically based on temperature.
- 50,000 hour rated lifespan.

Where Do They Make the Biggest Difference?
- Hooking up a trailer at night without a spotter
- Boat ramps, where you need to see the edge and the water line
- Camp and overland setups in the dark
- Trail and rock crawling, where the obstacle you can't see is always behind you
- Job sites and work areas where the truck backs into tight spots

Amber or Red Backlight: Which One Should You Pick?
Every M&R reverse kit has a bright white main light plus a backlight in your choice of color. The price is the same either way, so it comes down to how you want to wire it.
- Amber backlight: can be wired as turn signals.
- Red backlight: can be wired as turn signals or brake lights.
If you only care about the white light for backing up, either one works, and the backlight can stay off. If you want the rear of your truck to double as a signal, pick the color that matches the job. Rules for amber and red lights vary by state, so check yours before wiring the backlight as a turn signal or brake light.

Which Trucks Have a Kit? (A Lot of Them)
We don't do one universal pod and a bag of shims. Every reverse kit is engineered for one truck's exact rear end — and the lineup keeps growing. Spot yours:









Also available: Ford Ranger, RAM 1500 TRX, RAM 2500/3500 (2019-24 & 2025+), GMC Sierra 2500/3500 HD, Lexus GX550, and Subaru Outback. Every kit is $229.99 and bolt-on. Don't see yours? We add fitments regularly — check the reverse lights collection or reach out.
How Do You Wire LED Reverse Lights?
Here's the honest version: the kit doesn't include a wiring harness. Each pod comes with about 2 ft of wire, and you need a way to power them.
- Factory AUX switches. If your truck has AUX wires, the pods connect to them, usually with a 2-conductor extension wire to reach the engine bay or switch location. You switch the lights from the cab.
- The M&R Wireless 8-Switch Harness 2.0. No AUX wires needed. A wireless remote runs up to 8 accessories, and the harness is rated for 100 total amps. It also powers any other 12V accessory, so it's not just for lights.

The Ford Ranger Raptor is the easiest case. It has rear AUX wires, so the pods connect straight into them and the extension isn't needed. New to wiring without a factory switch panel? See how to wire without AUX switches.
One more thing to know: because the pods are switched, they don't automatically come on when you shift into reverse. That's by design. You decide when the white light runs, which matters because of the next section.
Are LED Reverse Lights Legal?
Treat the white main light as off-road only. It's bright enough to blind drivers behind you and isn't street-legal, so switch it on at the ramp, the campsite, the trail, or on private property, and leave it off on public roads. Local rules differ, so know yours.
Does It Bolt On, or Do You Have to Cut Anything?
Every kit is a complete bolt-on. The pods mount to factory bolt points or a black powder-coated metal bracket built for your vehicle. There's no cutting or drilling, and each kit has a video install guide.

Building out the rest of your truck? Our vehicle guides cover every lighting option: Ford Super Duty, Ford Ranger Raptor, and RAM 1500 RHO.
Frequently Asked Questions
Do LED reverse lights replace my factory reverse lights?
No. They add to them. Your factory lamps stay in place and keep doing their job.
Do the lights come on automatically in reverse?
Not by default. The kits are normally wired to an AUX switch or a wireless harness so you choose when they run. The Ford Ranger Raptor can also tap the factory reverse wires.
Is a wiring harness included?
No. Each pod has about 2 ft of wire. You power the kit from factory AUX wires or a wireless or generic harness, and usually add a 2-conductor extension wire.
Will I have to drill?
No. Every kit is a complete bolt-on that uses factory bolt points or a vehicle-specific bracket.
How much do they cost?
Every M&R reverse light kit is $229.99, with free ground shipping in the lower 48 states and a 60-day return window.
Shop the Build
Ready to see what's behind you? Bolt-on, no cutting or drilling:
- LED Reverse Light Kits: pick your vehicle and your backlight color
- LED Reverse Lights for Trucks & SUVs: fitment table, wiring, and full FAQ
- Wireless 8-Switch Harness 2.0: power the kit from the cab
Leave a comment