Introducing the 2024+ Ford F-150 Tremor Fog Light Kit: Four PRO Pods, Factory Switch, Zero Drilling

Most factory fog lights are built to do one small job: light the road edge a few car lengths ahead in bad weather. That's fine on a commute. It's not fine on a dark forest trail at 9 p.m. when the Tremor you bought for exactly that trail is throwing a dim puddle of light at the bumper.

So we built a replacement. The M&R fog light kit for the 2024+ Ford F-150 Tremor standard bumper drops four PRO LED pods into the factory fog openings — two per side — and it's bolt-on, no drilling, with H11 adapters that let your factory fog light switch run it.

Fog beam vs. driving beam: why two pods per side

A fog beam is short and wide; a driving beam is narrow and long. Fog patterns spread light low and sideways so it fills the ground right in front of you and the edges of the trail without bouncing off mist back into your eyes. Driving patterns pack light into a tighter cone to reach far down the trail. One pod can't do both well — so each side of this kit gets one of each:

• 20W PRO pod — fog beam. Angled 15° outward to light the trail edges, ditches and corners.
• 40W PRO pod — driving beam. Aimed straight ahead for distance and throw.

Both use a TIR (Total Internal Reflection) lens, which collects nearly all the light from the LED and aims it, instead of spilling it as glare. Want a different pattern? Email us — we'll set up custom lenses.

Standard bumper or modular bumper? Check before you buy

The 2024+ Tremor came with two different front bumpers, and the fog openings aren't the same. This kit is for the standard bumper only. If your Tremor has the modular bumper, you need the modular kit:

Pick your colors — they don't have to match

You choose the main beam color for the 20W pods and the 40W pods separately. A popular setup: white on the 40W for maximum reach, yellow on the 20W to cut dust, fog, snow and rain with less glare. Or run all white, or all yellow.

Every pod also has an amber DRL backglow — a street-safe daytime accent that doesn't throw much light, it just gives the front end a bold amber look. The white and yellow main beams are off-road use only.

Why the shroud isn't \"just 3D printed\"

The shroud holding the pods is printed in ASA-GF, glass-fiber reinforced ASA — the same polymer family automakers use for exterior trim and mirror caps. It's not PLA or PETG, the hobby filaments that soften in summer heat and fade in the sun. ASA-GF stays rigid, holds its shape under sun load and shrugs off UV, rain and vibration.

Wiring: use your factory fog switch

The kit includes a wiring harness and 2 H11 adapters. The H11 adapters plug into the factory fog light connectors, so the factory fog switch in your cab can turn the pods on — no new switch required. Pod wires: red = main light, black = ground, white = amber DRL.

How we wired ours:

• 20W pods on the H11 adapters → factory fog switch
• 40W pods on one AUX switch
• Amber DRL from all four pods on a second AUX switch

That's just our setup — any circuit can go on the factory switch or an AUX switch. One rule: don't put the main light of all four pods on one switch. Together they draw about 10.7 amps, too much for the factory fog circuit or a single AUX switch. No AUX switches? Our Wireless 8-Switch Harness powers everything with no wires through the firewall.

Install video

It's a bolt-on job that reuses the factory bolts and clips — no cutting or drilling. Here's the full step-by-step:

Light up the back too

Your factory backup lights have the same problem as the fogs. Our 2021+ F-150 reverse light kit adds two flood-pattern PRO pods with an amber or red backlight, and it fits every non-Raptor F-150.

FAQ

Does this fog light kit fit the F-150 Tremor modular bumper?

No. It fits the 2024–2026 F-150 Tremor standard bumper only; the modular bumper has its own kit.

Do I have to drill?

No. It bolts into the factory fog openings and reuses the factory bolts and clips.

Can I use my factory fog light switch?

Yes. The 2 included H11 adapters plug into the factory fog connectors so the factory switch turns on whichever pods you wire to them.

How many amps does the kit draw?

Each 20W pod draws 2.06 A and each 40W pod 3.30 A on main light; the amber DRL is under 0.1 A per pod.

Are the fog lights street legal?

The white and yellow main beams are for off-road use only. The amber DRL backglow is a street-safe daytime accent.

When does it ship?

We're taking pre-orders now and start shipping mid-November.

Keep exploring

• All Ford F-150 Tremor LED lights
• White vs yellow vs amber: which light color should you get?
• Why factory backup lights aren't enough
• All LED fog light kits