- Product Description
- Shipping & Warranty
➡️Special Features (only featured in this wireless 2.0)
Sleep Mode (Power-Saving Mode): If the input voltage of the Control Box falls below 13V (±0.2V), the Control Box will enter the sleep mode after 6 hours (default) of consecutively inactivity, then all loads will be shut down immediately and the Control Box will not respond to any commands from the Wireless Control Panel. When the input voltage rises above 13V (±0.2V), the Control Box will be awoken.
Low Voltage Protection: If the input voltage of the Control Box falls below 12.2V (±0.2V), the Control Box will enter the low voltage timing mode. After exceeding 30 minutes, the Control Box will start the low voltage protection, then all loads will be shut down immediately and the Control Box will not respond to any commands from the Wireless Control Panel. When the input voltage rises above 13V (±0.2V), the Control Box will exit the low voltage protection.
Ultra-Low Voltage Protection: If the input voltage of the Control Box falls below 11.6V (±0.2V), the Control Box will enter the ultra-low voltage timing mode. After exceeding 10 seconds, the Control Box will start the ultra-low voltage protection, then all loads will be shut down immediately and the Control Box will not respond to any commands from the Wireless Control Panel. When the input voltage rises above 13V (±0.2V), the Control Box will exit the ultra-low voltage protection.
High Temperature Protection: If the temperature at the center of the Control Box's circuit board exceeds 100°C (±5°C), the Control Box will start the high temperature protection and immediately shut down all loads.
➡️Wireless Harness Specs
The main control box has 8 circuits, ranging in different amps.
(3) 10amps
(2) 20amps
(3) 30amps
The fuse box is made out of high thermal conductivity die-case aviation aluminum housing. Allowing it to resist high-intensity impacts and is fully suitable for extreme off-road conditions. The surface is powder coated with UV-resistant polyester for weather resistance. The internal two-component thermally conductive mixture conducts and dissipates the heat generated by the circuity more quickly and effectively.
INCLUDES:
- Rechargeable wireless controller, USB Type-C connector
- Mounting plate that you attach to your preferred place inside the vehicle. The remote is magnetic for easy operation.
- Sticker page to change the key icon to match the device connected to the control box.
Wireless Connectivity: With advanced wireless technology, connect and power various accessories without the need for traditional wiring. Enjoy a cleaner and more organized interior. Wireless remote stays inside your vehicle without the need to run a wire through the firewall.
8 Switches: Total of 8 circuits: (3) 10amps, (2) 20amps, (3) 30amps
- Max power: 1200watts
- Max current Rating: 100amps
- Voltage: DC 12V-24V
Plug-and-Play Compatibility: Installing accessories has never been easier. Designed with a user-friendly, plug-and-play interface, eliminating the need for complex wiring setups. Simply connect your accessories to the panel and you're ready for an adventure.
Universal Compatibility: Whether you're adding LED lights, off-road equipment, or other accessories, our wireless wiring harness is universally compatible. Seamlessly integrates with your vehicle's electrical system.
Enhanced Safety: Reduce the risk of electrical issues and potential hazards associated with traditional wiring systems. Engineered with safety in mind, featuring built-in safeguards to protect against overloads, short circuits, and other electrical mishaps.
Weatherproof Design: Built to withstand the toughest conditions, it is fully weatherproof. It has a rubber gasket around the fuse box and covered in epoxy.
WHAT'S INCLUDED?
(1) fuse box with 8 circuits
(2) zip ties to mount fuse box inside the engine bay
(1) wireless remote with stickers, type "C" cord for charging
(1) red wire-- positive
(1) black wire--negative
INSTALLATION INSTRUCTIONS
Please watch videos below of Mike installing Wireless Wiring 2.0 on different trucks.
You can also find written instruction manual HERE.
The wireless wiring harness has a 1 year warranty.
M&R Automotive is not responsible for misuse or improper installation of this product. Professional installation is recommended.
Customer Reviews
I installed the product this last weekend. It works great with my ditch lights. I am excited to connect more accessories to it in the future.
The 8 circuit wire harness 2.0 is a premium product. Build quality is great. I liked it so much that's I ordered another product form this company.
Very easy install. Instructions and video made the install a breeze.
Easy install near rear / battery side firewall using existing holes on the truck. Fashioned a couple of straight brackets to the back of the control box, and lined up with the holes, bolted in with black oxide bolts and nynuts - super solid. I like the remote control buttons - especially the M (master) button, which turns off/on all at once. Real handy so that I can use my light bar and ditch lights on either high or low truck beams. And the buttons are raised so I can just feel the middle M button to switch depending on oncoming traffic etc without looking at the remote control while driving. Also installed the rear (amber option) reverse lights which run automatically without the remote control. The best thing for me about the lights/kit is that I didn't have to modify the truck whatsoever - no drilling. I like the 2.0 version of the wireless with the buttons under the hood as well and not having to run wires thru the firewall into the cab. Great products all - am recommending to all my friends - which is an easy sell as the lights and functionality are impressive.
I was looking for something that i could use to keep myself from having to fish through the firewall of my 2017 F250 6.7. This product was a life saver.
Very well built, easy to wire up my light bar with and plenty of circuits for future expansion.
Only issue i had was with the truck and not the M&R harness, there is zero room under the hood of a 6.7, so i ended up designing and 3D printing a replacement battery strap to mount it to that shifted it over to clear the hood contour and to also allow for water runoff.
One of the best upgrades to my truck as, to date.
