- Product Description
- Light Bar Specs
- Shipping & Warranty
Fits: 2021–2026 Ford Bronco
- Fits hard and soft top
- We have tried to eliminate as much wind noise as possible by designing this as close to the windshield as we can without interfering with anything. However, as with all roof light bars, some wind noise is expected. We recommend to adjust the light bar a bit down at an angle to minimize the noise.
- Metal bracket is powder coated black
**PLEASE NOTE** If you will be using AUX switches, there is only (1) AUX power wire that is factory behind the visor. For single light bar color, it will be sufficient enough to use this (1) AUX switch. For dual function light bar, you will need to run your own power for the DRL function.
Choose light output color:
1) White LED — Up to 15,000 lumens. Bright, powerful light for any adventure. Off-road use only — the white beam blinds oncoming traffic and isn't street-legal.
2) Amber LED — Up to 7,000 lumens. Cuts through dust, fog, snow, and rain far better than white light. Ideal for poor conditions. Off-road use only.
3) Dual Function: White LED + Amber DRL backglow — Full white beam (same as above), plus a soft amber "daytime running light" glow. The DRL is purely cosmetic and street-safe — it won't blind oncoming traffic, so you get a standout amber accent you can run anywhere.
WHAT'S INCLUDED?
(1) 40in light bar - SLIM
(2) mounting brackets
All mounting hardware
WIRING
- M&R Automotive doesn’t provide a wiring harness.
- The light bar has 6ft of wire which is enough to reach AUX wires. Otherwise, you will need to purchase a generic wiring harness from Amazon/Ebay or create your own.
- We sell a wireless wiring harness that delivers a clean, hassle-free install—no need to run wires into the cab.
40in SLIM light bar
White:
- Beam Pattern Spot
- Theotetical max power 180watts
- Actual power 102watts
- Voltage/current DC12v/6.5A
- Theoretical max luminous flux 21,060 lm
- Measured luminous flux (without lens) 11,376 lm
- Measured luminous flux (with lens) 8,340 lm
- LEDs type CREE XTE
- Temperature 6000k
- LEDs number 36pcs
- Product size LxWxD (in) 38.93 x 0.75 x 1.63
40in SLIM light bar
Amber:
- Beam Pattern Spot
- Theotetical max power 140watts
- Actual power 78watts
- Voltage/current DC12v/6.5A
- Theoretical max luminous flux 11,160 lm
- Measured luminous flux (without lens) 7,380 lm
- Measured luminous flux (with lens) 5,387 lm
- LEDs type CREE XP - E2 Amber
- LEDs number 36pcs
- Product size LxWxD (in) 38.93 x 0.75 x 1.63
White with Amber DRL
- Beam Pattern Spot
- Theotetical max power 180watts
- Actual power 102watts
- Voltage/current main DC12v/6.5A
- Voltage/current backlight 5.5W/0.46A
- Theoretical max luminous flux 21,060 lm
- Measured luminous flux (without lens) 11,376 lm
- Measured luminous flux (with lens) 8,340 lm
- LEDs type CREE XTE
- Temperature 6000k
- LEDs number 36pcs
- Product size LxWxD (in) 38.93 x 0.75 x 1.63
We have a lifetime warranty on our light kits. We truly want our truck enthusiastic customers to enjoy their products as much as we enjoy designing them. However, we also understand that different situations arise with brackets or lights. For more information about our warranty and disclaimer click here.
*M&R Automotive is not responsible for misuse or improper installation of the product. Professional installation is recommended.
Customer Reviews
I’ve tried a couple other light bars using the Ford factory ready windshield mounting points on my 2021 Black Diamond. I expected a little wind noise, but they caused a flapping noise at all speeds with the soft top that wasn’t worth it. I saw someone post about the M&R 2021+ Ford Bronco 40in Roof Mount Light Bar - Slim and gave it one more try. It looks great, wind noise is minimal, and best of all there is no flapping of the soft top. Installation was straight forward and I especially like being able to use the factory covers for the windshield mounting studs. I used the factory AUX switch 1 and the wiring Ford installed up above the passenger sun visor.
After going through multiple types of light bars. I could dealt with the high pitched whistles and the flapping it caused my soft top. I installed the M&R and I’m pleased. No whistle and my soft top has flapped. Easy installation and the best part is the light bar came with a wire log enough that I didn’t have to splice wire to the auxiliary box.
Great product for the price. It’s a great look on the truck, clean straight lines. It was pretty simple to install. How the pillar lights and bumper lights all match. Looking good. Thanks Mike keep it up, great job!!
I had my local Ford dealer install the light on my 22 Bronco badlands 2 dr. I picked the light due to lower wind noise (due to small size and not a ton of cooling ridges/fins), brightness and small
Size. All of which proved true. They had to mount bar on wind deflector of my Trailrax roof rack because the mount holes were occupied by the roof rack.
Used hero switch 1 due to watt/amp requirement. Only 2 minor complaints. Slow shipping and no black powder coated bolts for alternative mounting. Love the light. Whn i flip it on the neighbors think the sun just came up. Would highly recommend!