icon 2022-2024 Ford Expedition Hood Mount Kit
Search
Cart (0)
Search Close
Hood Mount KitBrackets Only
$269.99
  • Product Description
  • Light Specs
  • Shipping & Warranty
  • Fits 2022 2023 2024 Ford Expedition
  • Models:  XL STX, XLT, XLT MAX, Limited, Limited MAX, King Ranch, King Ranch MAX, Timberline, Platinum, Platinum MAX


  • The LED pods are dual function light color. It has main white LED light with amber DRL “daytime running lights” backglow. They are purely for aesthetics. It doesn’t give out much light, but more of a beautiful amber backglow. Something extra to make you stand out on the road.
  • Upon install, you have full adjustability where you want your pods to shine (straight or to the side to serve as ditch lights)
  • Spot pattern
  • Low profile
  • Easy install
  • Doesn't interfere with windshield wipers
  • Metal bracket is powder coated black
  • No cutting or drilling required. The kit is a complete bolt on using factory hardware

 

  • **PLEASE NOTE** If you are purchasing just mounting brackets and have different size pods to use, M&R doesn't guarantee correct fitment. It should, but not promised to fit other 3.2in light pods. We can't guarantee 100% fitment and will not accept a return on just brackets. Please do your own research and measuring before. 

 

👍Our light kits are for off-road use only. 

    WHAT'S INCLUDED?

    (2) 3.2in light pods

    (2) mounting brackets

    All mounting hardware

    WIRING

    M&R Automotive provides a wire harness that connects the 2 light pods together. You will need to connect this wire to a battery. This wire is long enough to reach AUX switches if you have them. If you don't have AUX, you will need to purchase a separate generic wiring harness that connects to the battery. 


    In our install, we used M&R Wireless 8 Circuit Wiring Harness. This makes install much easier, no need to run any wires through the firewall, clean install. 

    Sale Off
    Wireless 8 Circuit Wiring Harness 1.0

    INCLUDES:

    • Rechargeable wireless controller, USB Type-C connector
    • Mounting plate that you attach to your preferred place inside the vehicle. The remote is magnetic for easy operation.
    • Sticker page to change the key icon to match the device connected to the control box.

    Wireless Connectivity: With advanced wireless technology, connect and power various accessories without the need for traditional wiring. Enjoy a cleaner and more organized interior.  Wireless remote stays inside your vehicle without the need to run a wire through the firewall.

    8 Switches: Total of 8 circuits: (2) 5amps, (2) 10amps, (2) 20amps, (2) 30amps

    • Max power: 1200watts
    • Max current Rating: 80amps
    • Voltage: DC 12V-24V

    Plug-and-Play Compatibility: Installing accessories has never been easier. Designed with a user-friendly, plug-and-play interface, eliminating the need for complex wiring setups. Simply connect your accessories to the panel and you're ready for an adventure. 

     

    Universal Compatibility: Whether you're adding LED lights, off-road equipment, or other accessories, our wireless wiring harness is universally compatible. Seamlessly integrates with your vehicle's electrical system.

     

    Enhanced Safety: Reduce the risk of electrical issues and potential hazards associated with traditional wiring systems. Engineered with safety in mind, featuring built-in safeguards to protect against overloads, short circuits, and other electrical mishaps. 

     

    Weatherproof Design: Built to withstand the toughest conditions, it is fully weatherproof. It has a rubber gasket around the fuse box and covered in epoxy. 

    $154.99
    Sale Off
    Wireless Control Panel and Control Box for the Wireless 8 Circuit Wiring Harness 2.0.

    ➡️Special Features (only featured in this wireless 2.0)

     

    Sleep Mode (Power-Saving Mode): If the input voltage of the Control Box falls below 13V (±0.2V), the Control Box will enter the sleep mode after 6 hours (default) of consecutively inactivity, then all loads will be shut down immediately and the Control Box will not respond to any commands from the Wireless Control Panel. When the input voltage rises above 13V (±0.2V), the Control Box will be awoken.

    Low Voltage Protection: If the input voltage of the Control Box falls below 12.2V (±0.2V), the Control Box will enter the low voltage timing mode. After exceeding 30 minutes, the Control Box will start the low voltage protection, then all loads will be shut down immediately and the Control Box will not respond to any commands from the Wireless Control Panel.  When the input voltage rises above 13V (±0.2V), the Control Box will exit the low voltage protection.

    Ultra-Low Voltage Protection: If the input voltage of the Control Box falls below 11.6V (±0.2V), the Control Box will enter the ultra-low voltage timing mode. After exceeding 10 seconds, the Control Box will start the ultra-low voltage protection, then all loads will be shut down immediately and the Control Box will not respond to any commands from the Wireless Control Panel. When the input voltage rises above 13V (±0.2V), the Control Box will exit the ultra-low voltage protection.

    High Temperature Protection: If the temperature at the center of the Control Box's circuit board exceeds 100°C (±5°C), the Control Box will start the high temperature protection and immediately shut down all loads.

     

     

    ➡️Wireless Harness Specs

     

    The main control box has 8 circuits, ranging in different amps. 

    (3) 10amps

    (2) 20amps

    (3) 30amps

     

    The fuse box is  made out of high thermal conductivity die-case aviation aluminum housing. Allowing it to resist high-intensity impacts and is fully suitable for extreme off-road conditions. The surface is powder coated with UV-resistant polyester for weather resistance. The internal two-component thermally conductive mixture conducts and dissipates the heat generated by the circuity more quickly and effectively.

     

     

    INCLUDES:

    • Rechargeable wireless controller, USB Type-C connector
    • Mounting plate that you attach to your preferred place inside the vehicle. The remote is magnetic for easy operation.
    • Sticker page to change the key icon to match the device connected to the control box.

    Wireless Connectivity: With advanced wireless technology, connect and power various accessories without the need for traditional wiring. Enjoy a cleaner and more organized interior.  Wireless remote stays inside your vehicle without the need to run a wire through the firewall.

     

    8 Switches: Total of 8 circuits: (3) 10amps, (2) 20amps, (3) 30amps

    • Max power: 1200watts
    • Max current Rating: 100amps
    • Voltage: DC 12V-24V

     

    Plug-and-Play Compatibility: Installing accessories has never been easier. Designed with a user-friendly, plug-and-play interface, eliminating the need for complex wiring setups. Simply connect your accessories to the panel and you're ready for an adventure. 

     

    Universal Compatibility: Whether you're adding LED lights, off-road equipment, or other accessories, our wireless wiring harness is universally compatible. Seamlessly integrates with your vehicle's electrical system.

     

    Enhanced Safety: Reduce the risk of electrical issues and potential hazards associated with traditional wiring systems. Engineered with safety in mind, featuring built-in safeguards to protect against overloads, short circuits, and other electrical mishaps. 

     

    Weatherproof Design: Built to withstand the toughest conditions, it is fully weatherproof. It has a rubber gasket around the fuse box and covered in epoxy. 

    $194.99


    INSTALLATION INSTRUCTIONS



    All domestic (USA) orders are free shipping via USPS or UPS, depending on product size.
    We typically ship in 3-7 business days. If we are anticipating a delay with your shipment due to availability of the product, we will reach out to you via email.

    Canada, international or express shipping costs are calculated at checkout. 

    You will receive an email with tracking number when your order is shipped. 

    If you have a special request about your order, reach out, we try to accommodate as much as we can. 

    For a complete shipping policy click here.  


    We have a lifetime warranty on our light kits. We truly want our truck enthusiastic customers to enjoy their products as much as we enjoy designing them. However, we also understand that different situations arise with brackets or lights. For more information about our warranty and disclaimer click here. 




    *M&R Automotive is not responsible for misuse or improper installation of the product. Professional installation is recommended. 



    Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    A
    A.O.
    Didnt fit

    I bought it based on comments in a Ford Expedition Forum hoping it would fit my 2011 Expedition. Did not work. The bracket is small, about an inch tall which is not enough to go above the trim.. if it was 2-2.5 inches it would work perfect.

    Hi. Unfortunately we don't have a ditch lights for the Expedition 2011. Per our listing, it has been properly tested on years 2022+. I am not aware of any comments that are on forums stating it fits other years. If it does, I believe it was somehow modified by the customer but not by me.

    M&R Automotive

    M&R Automotive