Cart 0

Sorry, looks like we don't have enough of this product.

Pair with
Subtotal Free
View cart
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty

Subaru Outback reverse light kit bright LED pods illuminated on rear bumper in wet parking lot, fits 2020-2024 models
Subaru Outback reverse light kit on 2020-2024 Outback with bright LED pods and red backlight illuminated in wet parking lot
Subaru Outback reverse light kit installed on white 2020-2024 Outback SUV in wet parking lot, rear view showcasing LED pods
Subaru Outback reverse light kit 2020-2024 installed rear bumper LED pod on wet parking lot
Subaru Outback reverse light kit installed under rear bumper showing dual LED pod upgrade for 2020-2024 Outback models
Subaru Outback reverse light kit on 2020-2024 Outback showing bright LED reverse pods in rainy parking lot
Subaru Outback reverse light kit installed under rear bumper, dual white LED pods for 2020-2024 Outback models
Subaru Outback reverse light kit installed on 2020-2024 Outback rear bumper showing bright LED reverse pods
Subaru Outback reverse light kit installed under rear bumper, dual LED pods on 2020-2024 Subaru Outback
Subaru Outback reverse light kit installed on 2020-2024 Subaru Outback rear bumper in wet parking lot
Subaru Outback reverse light kit installed under rear bumper, bright LED pod illuminated on wet parking lot surface
Subaru Outback reverse light kit 2020-2024 installed on rear bumper with bright LED pods illuminated

2020-24 Subaru Outback Reverse Light

Regular price $229.99
Backlight optionAmber

What's in the Box

  • (2) 20w PRO pods
  • (2) metal brackets
  • All hardware included
Slide image

Off-road use only

Slide image

Bolt On, No Drilling

Slide image

Vehicle Specific Design

Slide image

Lifetime Warranty


2020-24 Subaru Outback Reverse Light

$229.99

Fits: 2020–2024 Subaru Outback

Trims: Base, Premium, Onyx Edition, Onyx Edition XT, Limited, Limited XT, Touring, Touring XT, Wilderness

  • Each kit comes as a PAIR of pods
  • main White LED light -- you choose your backlight (amber or red)1) Amber back light that can be wired as turn signals

or

    • 2) Red backlight that can be wired as turn signals or brake light
  • Flood Pattern: wider beam focuses for illumination further down the trail or road as well as peripheral angles
  • Each LED light pod is attached to a metal bracket on each side
  • Metal bracket is powder coated black
  • This in addition to factory reverse light. The factory reverse light doesn't provide enough light output at night. Install M&R reverse light with powerful white LED light that makes a huge difference.
  • No cutting or drilling required. The kit is a complete bolt on

Introducing our new LED light bar-PRO with a unique appearance and optimal performance.

  • Combo Pattern: combined spot and driving optics offer a balance between distance and width
  • Uses a TIR (Total Internal Reflection) lens, which is different from our regular slim light bar. The TIR lens collects all of the light from the LED and directly leads them to where you need, drastically reducing glare and improving total efficiency.
  • Higher light efficiency: brighter, longer irradiation distance
  • Housing is upgraded to 304 aluminum. The surface is UV polyester powder coated to protect against UV, salt water, corrosion, fading and scratch resistant.
  • Equipped with thermal management system that automatically adjusts the brightness output according to the external temperatures

Each LED pod comes with about 18 in of wire; the rest of the wiring is the customer's responsibility. M&R recommends extending it into the engine bay with 14-2 wire (14-gauge, 2-strand), sold separately. In the engine bay, it connects to AUX switch wiring if your vehicle has them. Otherwise, a generic harness must be purchased separately (Amazon/eBay) or built.

Easier option — our Wireless Harness. Powers the lights with no AUX switches and no wires run through the firewall. Clean, simple install.

2020-24 Subaru Outback Reverse Light light bar specs
  • All domestic (USA) orders within 48 states are free ground shipping via USPS or UPS, depending on product size.
  • We typically ship in 3-7 business days.
  • If we are anticipating a delay with your shipment due to availability of the product, we will reach out to you via email.
  • Canada, international or express shipping costs are calculated at checkout.
  • You will receive an email with tracking number when your order is shipped. If you have a special request about your order, reach out, we try to accommodate as much as we can. For a complete shipping policy.

We have a lifetime warranty on our light kits. We truly want our truck enthusiastic customers to enjoy their products as much as we enjoy designing them. However, we also understand that different situations arise with brackets or lights. For more information about our warranty and disclaimer.

*M&R Automotive is not responsible for misuse or improper installation of the product. Professional installation is recommended.

HOW TO INSTALL?

Install Video
Wiring

Each LED pod comes with about 18 in of wire; the rest of the wiring is the customer's responsibility. M&R recommends extending it into the engine bay with 14-2 wire (14-gauge, 2-strand), sold separately. In the engine bay, it connects to AUX switch wiring if your vehicle has them. Otherwise, a generic harness must be purchased separately (Amazon/eBay) or built.

Easier option — our Wireless Harness. Powers the lights with no AUX switches and no wires run through the firewall. Clean, simple install.

Light Output